20m Idrostop Mastic Exporters For Kenya Exporters For Kenya Exporters For Kenya Exporters For Maldives Exporters In Sri Lanka

Brand - Mapei

Model - WHF33

Consistency - thixotropic paste

Colour - white

Density (g/cm) - 1.45 + 0.03

Dry solids content (%) 100

EMICODE - EC1 Plus - very low emission

Application Temperature - from +5C to +35C

Dust Dry - 10 mins

Adjustment Time - 5 mins

Initial hardening time with non-absorbent substrates - 1 h 30 mins. (on dry substrates) 25 mins. (on damp substrates)

Final hardening time - 24H

Shore A hardness - 80

In Service Temperature range - -40C to + 90C

Consumption - Approximately 290 ml for every 12 linear metres of Idrostop

Packaging - Cartons containing 24 cartridges of 290 ml

To apply, extrude the adhesive onto the surface on the previously cut to size Idrostop, or directly onto the concrete. Press the Idrostop onto the substrate, gently firming it in all directions to ensure complete adhesion.
Concrete can be poured after
24 hours. Idrostop Mastic is also suitable for bonding joints between pieces of Mapeband.

Single-component adhesive for the installation of Idrostop
Idrostop Mastic is a ready to use solvent-free single-component adhesive with a base of MS polymers. On extrusion, it is a thixotropic paste suitable for horizontal and vertical application that cures with humidity at a temperature between 10°C and 40°C to form an elastic product.