Bitutherm Board Price Exporters For Uganda Exporters For Uganda Exporters For Uganda

Brand - Bitumat

Model - WHF18

Thickness - 50mm 

Board Size - Standard size L - 1250mm x W 600mm
also available L - 2500mm x W 1200mm

Edge Profiles - Shiplap

Surface - Smooth

Bitumat BituTHERM is utilized for the thermal insulations of:
• Flat roofs, either accessible or non-utilizable,
as inverted roof construction.
• Roof Gardens.
• Parking decks.
• Exterior walls of buildings insulted on outer
surfaces
• Below-grade exterior walls of basements
(Perimeter insulation).
• On-grade floors of buildings.
• Cold store Insulations.

WALLS

Bitumat BituTherm (W) can be used as wall insulation also. It can be applied in several ways including as a sandwich application.

ROOF

Bitumat BituTherm (R) can be very conveniently installed on a roof. In classical as well as Inverted roofs. It can be used with most roof membranes if appropriate precautions are observed. Once the waterproofing membrane has been installed and flood tested, the Bitumat BituTherm insulation boards can be installed loose laid or spot bonded to the waterproofing membrane. In protected roof membrane assemblies, ballast is applied after Bitumat BituTherm board roof insulation has been oose-laid over the roof membrane.

MULTIPLE-LAYER INSULATION

IThe recommended specification is for multiple-layer insulation. Bitumat urges double-layer application, especially when the total required thickness of XPS insulation is more than 2 inches (50 mm). Cover boards are considered to be components of a multiple-layer insulation assembly.